Active control Based Three-phase Reclosing Scheme for Single Transmission Line with PMSGs

Electric devices may be damaged due to the strong secondary impact when the circuit breaker recloses on permanent faults, so it is significant to identify the fault nature to reduce the harm of grid faults. To achieve this point, a new control scheme is designed to make permanent magnet synchronous generator (PMSG) based wind turbines behave as a three-phase symmetrical voltage source, so the overcurrent can be detected for permanent faults when the circuit breaker on the PMSG side is reclosed, but only the tiny capacitance current is present for temporary faults. Therefore, the fault nature can be identified by detecting the current amplitude. To accurately extract the power-frequency phasors, a fast matrix pencil extraction method is adopted. This method solves the difficulty in fault nature detection caused by the rapid disappearance of current and voltage after a three-phase trip using the controllability of power electronics. Meanwhile, the severe secondary impact can be reduced since the injected current is small even for permanent faults. Additionally, the proposed method can ensure the fault current at the inverter terminal is within the limiting value and operate properly for remote high-resistance faults. Extensive simulations and experiments are performed to verify this method.